Denon AVR-E400

Error
Code
Details of Error code Display Coping strategies
62
Failed to start up Sub in PowerOn
sequence during Update.
U p d a t i n g f a i l 6 2
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "Power
operation (
X
)" button for ve seconds.
63
Failed to transit to
ApplicationMode.
U p d a t i n g f a i l 6 3
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "Power
operation (
X
)" button for ve seconds.
64
Failed to transit to
BootLoaderMode.
U p d a t i n g f a i l 6 4
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "Power
operation (
X
)" button for ve seconds.
80
WriteEnableLatchBit not set in Read
after issuing WREN command.
U p d a t i n g f a i l 8 0
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "Power
operation (
X
)" button for ve seconds.
81
BlockErase failed in Read after
issuing BE command.
U p d a t i n g f a i l 8 1
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "Power
operation (
X
)" button for ve seconds.
82
No UpdatePacket received from
DM860A (TimeOut).
U p d a t i n g f a i l 8 2
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "Power
operation (
X
)" button for ve seconds.
83
Abnormal data in UpdatePacket
received from DM860A
(FormatError).
U p d a t i n g f a i l 8 3
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "Power
operation (
X
)" button for ve seconds.
84
Abnormal data in UpdatePacket
received from DM860A
(CheckSumError).
U p d a t i n g f a i l 8 4
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "Power
operation (
X
)" button for ve seconds.
85
Abnormal data in UpdatePacket
received from DM860A
(DataLength/DataNo).
U p d a t i n g f a i l 8 5
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "Power
operation (
X
)" button for ve seconds.
86
Mismatched CheckSum in
CheckSum comparison after
rewriting.
U p d a t i n g f a i l 8 6
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "Power
operation (
X
)" button for ve seconds.
A2 Unable to detect USB.
C o n n e c t i o n F a i l A 2
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "Power
operation (
X
)" button for ve seconds.
A3 No FirmwareFile in USB.
F i l e s N o t F o u n d A 3
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "Power
operation (
X
)" button for ve seconds.
A4
FirmwareFile in USB for
unsupported Model name/area
N o t M a t c h F i r m A 4
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "Power
operation (
X
)" button for ve seconds.
A6
Error notication received while
requesting FirmwareInfo.
U p d a t i n g f a i l A 6
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "Power
operation (
X
)" button for ve seconds.
72