Sound Mode
Surround Parameter
Subwoofer
Tone
z
12
Audyssey
Restorer
z
15
Effect Level Room Size
Height Gain
z
11
PRO LOGIC
g
/
g
x Music mode only
NEO:6 Music
mode only
Panorama Dimension Center Width Center Image
MultEQ
®
z
13
Dynamic EQ
z
14
Dynamic
Volume
z
14
DIRECT/PURE DIRECT (2-channel)
z
1
S
z
5
DIRECT/PURE DIRECT (Multi-
channel)
z
1
S
STEREO
S S S S S S
MULTI CH IN
S S S S S S
DOLBY PRO LOGIC
g
z
S S S S S S S
DOLBY PRO LOGIC
g
x
S S S S S S S S S
DOLBY PRO LOGIC
g
S S S S S S S S S
DTS NEO:6
S S S S S S S
DOLBY DIGITAL
S S S S S S
DOLBY DIGITAL Plus
S S S S S S
DOLBY TrueHD
S S S S S S
DTS SURROUND
S S S S S S
DTS 96/24
S S S S S S
DTS-HD
S S S S S S
DTS Express
S S S S S S
MULTI CH STEREO
S S S S S S
ROCK ARENA
S S S
S
z
16
S S S S
JAZZ CLUB
S S S S S S S S
MONO MOVIE
S S S S S S S S
VIDEO GAME
S S S S S S S S
MATRIX
S S S S S S
VIRTUAL
S S S S S S
z
1 During playback in PURE DIRECT mode, the surround parameters are the same as in DIRECT mode.
z
5 Only when “Subwoofer Mode” is set to “LFE+Main” , sound is output from the subwoofer.
z
11 This setting is available when the set sound mode name contains “+PL
g
z”. For information on how to check the sound mode, see .
z
12 This item cannot be set when “Dynamic EQ” is set to “On”.
z
13 For HD Audio whose sampling frequency of an input signal is more than 96 kHz, this sound parameter cannot be set.
z
14 This item cannot be set when “MultEQ
®
” is set to “Off” or “Graphic EQ”.
z
15 This item can be set when the input signal is analog, PCM 48 kHz or 44.1 kHz.
z
16 In this sound mode, bass is +6 dB, and treble is +4 dB (Default).
76
To Next Page
Loading...
Need help?
General
