DYMO Printers
•
The software enables the use of three DYMO paper or label sizes:
• 4x6 labels (DYMO 4XL only) and 2.5 inch paper rolls are used to print
screen captures and selected sample results from the Report or Graph
screens.
o Report and Graph print column formats will be as shown on the
instrument display.
• 1 x 0.5 inch labels are used to print sample names, sample
concentrations, units and the date on individual labels suitable for standard
microfuge tubes.
o When used with the Colorimterics or Custom Standard Curves app,
the concentration printed is the dilution factor applied recalculated
value.
•
A Quick Print button will be displayed on the Run, Report and Graph screens
when a DYMO printer is detected. Label sizes may be selected by tapping the
printer icon displayed next to the date and time in the bottom notification bar.
•
Although sample names may include up to 48 characters, the DYMO printed
label will print 2 rows of characters per sample name. The exact number of
sample name characters may vary depending on the language in use.
To Next Page
Loading...