•
Once the filter criteria have been selected, tap the Search button at the bottom
of the screen. Tap any column header to sort the results list.
•
Highlight the sample(s) of interest and tap the Add to Report button to include
the samples on the Report and Graph screens. Blank measurements may be
included in the list but will not provide any absorbance data.
•
All data must be from the same app type for the samples to be added to the
Report or Graph screens.
• Note: The Data app does not include a Graph screen for fluorescence
apps.
Export vs Archive
•
All data is automatically saved to the DS-11 FX onboard computer database at
the time of measurement.
• The Auto Export feature is available when a network folder is set-up using
the Accounts app.
•
The Export Selected Samples function available from the Report and Graph
screen overflow menus creates a .csv that can be emailed, sent to a network
folder or saved to a FAT32 formatted USB flash drive.
• When the export function is used, the data is not deleted from the
database and can be accessed using the Data app.
• Only one Kinetics run at a time may be added to a Report for export from
the Data app.
To Next Page
Loading...