The absorbance apps Blank button is used to establish a reference
absorbance within each measurement app. The graph will not
display a spectrum for a Blank measurement.
The absorbance apps Measure button is used for sample
measurements. It is inactive until at least one Blank measurement is
complete.
The fluorescence apps Standards Measure button is used to
measure standards when building a standard curve.
The Samples Measure button is used to quantitate samples.
The fluorescence apps Replicates On/Off button is used to define if
the standards curve enables one or up to three replicates.
The fluorescence apps Basic Measure button is used to make
single measurements not being read from a standard curve.
Fields with Drop-Down Menus are indicated by black or white
triangles located on the center bottom.
Fields with black underlines are editable by the user. Tapping on the
field will enable a keyboard, a numeric keypad or a dialog box.
Application specific editor options can be accessed using the List
Add/Edit button found to the right of some drop-down menus.
Options buttons are used for such purposes as change units or
trend line analysis parameters in the fluorescence apps.
An accept and return to previous screen button is found in the
lower right of some screens. All changes made to a selection are
immediate.
To Next Page
Loading...
Need help?
General