4. OPERATION
Page 89 © 2005 DH Instruments, Inc.
4.4.3.1 DATA PLOT RUN SCREEN
ADCS Tools uses the engine of COMPASS for Pressure® calibration software to
manage automated testing using ADCS-601. The Data Plot Run Screen
supported by ADCS Tools is a COMPASS for Pressure feature. See the
COMPASS for Pressure User’s Manual for additional information on this screen
and its options. The COMPASS for Pressure manual is an on-line manual
available by pressing the [?] button, when available, in COMPASS features. It
can also be accessed on the ADCS-601 system controller in the COMPASS for
Pressure program group reached using the Windows START button , Programs.
The Data Plot Run Screen is available any time a test is running for which there
is a data file. The screen can be used to display a variety of graphs of the data
currently logged in the Data File.
The Data Plot Run Screen can be opened by pressing the [Data Plot] button on
the ADCS Tools Main Tool Bar (see Section
4.3.3, Table 14).
Each point taken during a test causes the graph to update with the current test
point information. The graph can be changed or printed without affecting test
execution. Use the Data Plot Tool
Bar on the Data Plot Run Screen to select
the plot type and customize the current view.
Figure 42. Data Plot Run Screen
4.4.3.2 DATA GRID RUN SCREEN
ADCS Tools uses the engine of COMPASS for Pressure® calibration software to
manage automated testing using ADCS-601. The Data Grid Run Screen
supported by ADCS Tools is a COMPASS for Pressure feature. See the
COMPASS for Pressure User’s Manual for additional information on this screen
and its options. The COMPASS for Pressure manual is an on-line manual
available by pressing the [?] button, when available, in COMPASS features. It
can also be accessed on the ADCS-601 system controller in the COMPASS for
Pressure program group reached using the Windows START button , Programs.
To Next Page
Loading...