4. OPERATION
Page 81 © 2005 DH Instruments, Inc.
Figure 40. PPC3 Run Screen
4.3.6.4 RPM4 REFERENCE PRESSURE MONITOR
The RPM4 Run Screen provides more detailed information on the RPM4’s
pressure controller and a Toolbar to control it directly. Use the [RPM4 Run
Screen] button on the ADCS Tools Main Toolbar to open the screen. The
screen may be resized and relocated.
The RPM4 Run Screen should only be used to view RPM4 status. Use of the
Toolbar on this run screen may conflict with other ADCS-601 Tools
functions. The RPM4 Run Screen Toolbar should only be used for advanced
trouble shooting by qualified personnel.
Figure 41. RPM4 Run Screen
To Next Page
Loading...