3. INSTALLATION
Page 35 © 2005 DH Instruments, Inc.
Accessory/interconnect kit including: 402226
4 ea. KF16 clamps 102975
DESCRIPTION PART #
4 ea. KF16 centering rings 101544
1 ea. Blank-off cap, KF16 103238
1 ea. O-ring, silicone, 2-128 103621
1 ea. O-ring, Vitonr brown, 2-128 103692
1 ea. O-ring, silicone, 2-151 103004
1 ea. Bottle, 125 ml, distilled water 402229
1 ea. Piston insertion tool (in separate corrugated carton in Reference Bench
wood crate)
402231
3.1.8 FPG8601 MASS SET (MS-8601-2)
Precautions should be taken in handling the masses to minimize influences that may
change their mass. This includes always wearing protective gloves when handling the
masses to avoid contaminating them with body oils and perspiration. Protective gloves
are provided in the accessory kit of the PG7601 Platform.
The FPG8601 mass set is shipped in a black, molded plastic case in a corrugated liner.
The FPG8601 mass set is not used in day to day ADCS-601 operation (see Section
7.2.5).
Table 10 details all items included with the FPG8601 mass set.
Table 10. MS-8601-2 mass set parts list
DESCRIPTION PART #
401672
1 ea. CLB hanger 401789
1 ea. Molded case with insert 402072
3 ea. 0.5 kg mass 123500
2 ea. 0.2 kg mass 123498
1 ea. 0.1 kg mass 123496
3.1.9 SCROLL VACUUM PUMPS
Two identical scroll vacuum pumps required to operate the ADCS-601 system. One is the
roughing pump for the reference vacuum turbo pump. The other is the utility vacuum pump.
The pumps may be ordered from DHI with the ADCS-601 system or from the original
equipment manufacturer. If ordered from DHI they are delivered with the ADCS-601 system
with their power cords in corrugated containers with foam inserts.
The part number of the scroll pump is 103630 or 103717.
3.1.10 TURBO MOLECULAR VACUUM PUMP
A turbo molecular vacuum pump and controller are required to operate the ADCS-601
system.
The pump and controller may be ordered from DHI with the ADCS-601 system or from the
original equipment manufacturer. If order from DHI the pump is delivered in a corrugated
container with foam inserts. The turbo pump controller is delivered installed in the controller
bracket under the reference bench.
The part number of the turbo molecular pump is 103631
To Next Page
Loading...