ADCS-601™ OPERATION AND MAINTENANCE MANUAL
© 2005 DH Instruments, Inc. Page 74
4.3.4 ADCS STATUS BAR
The ADCS Tools Status Bar is located across the bottom of the main screen (see Figure 33,
Figure 35).
In all run modes, ADCS Tools flashes information related to the status of its current
operations
on this display. The red panel on the left displays the current major function. The
blue panel indicates the minor function, the text to the right indicates specific activity at a
given moment.
Figure 35. ADCS Status Bar
4.3.5 ADCS RUN SCREEN
The ADCS Tools ADCS Run Screen should be considered the equivalent of an instrument
front panel. It is the front panel of the ADCS-601 system. The run screen is the interface
through which ADCS functions are controlled and readings are observed (see
Figure 36).
The ADCS Run Screen is opened by pressing the [ADCS Run Screen]
button on the ADCS
Main Toolbar. The screen can be resized and repositioned.
The run screen has three main sections:
1. Control Panel (see Section 4.3.5.1): The Control Panel is for reading and controlling
the ADCS-601 system. It includes instrument displays.
2. Sy
stem Display (see Section
4.3.5.2): The System Display
is to provide real time information
on system status. It is an animated operational schematic of the ADCS-601 system.
3. Toolbar (see Section
4.3.5.3): The Toolbar buttons are for controlling ADCS-601 functions.
Figure 36. ADCS Run Screen
To Next Page
Loading...