DH Instruments ADCS-601 - Amh-38 Automated Mass Handler; Figure 16. AMH-38 Automated Mass Handler

To Next Page

To Previous Page

2. SYSTEM OVERVIEW

2.2.1.4 AMH-38 AUTOMATED MASS HANDLER

The AMH-38 automated mass handler is mounted on the PG7601 Platform (see

Section 2.2.1.1) and serves to automatically change the mass load on the piston-

cylinder to set different values of pressure.

The AMH-38 automated mass handler is a stand alone product for which a

separate Operation and Maintenance manual is available with much more

complete information than is included in this manual. A copy of the AMH

manual is provided on the ADCS-601 Support CD and is available at

www.dhinstruments.com

1. KF-40 vacuum connections (2)

2. Lifting handles (2)

3. Mass lifter and pneumatic actuation

solenoid valves

4. Vacuum bell jar (delivered with

PG7601 Platform)

5. AMH status indication LED

6. RS232 Port, COM1

7. DC power connection

8. Drive air pressure connection

9. Drive vacuum connection

Figure 16. AMH-38 automated mass handler