DH Instruments ADCS-601 - Remove, Clean and Reinstall the Piston-Cylinder Module; Removing the Piston-Cylinder Module; Figure 51. AMH Mass Set

To Next Page

To Previous Page

ADCS-601™ OPERATION AND MAINTENANCE MANUAL

SHOWN IS THE MS-AMH-38 MASS SET FOR THE AMH-38 MASS HANDLER. SMALLER MASS SETS MAY INCLUDE LESS

MAIN MASS DISCS. MASS SETS FOR THE AMH-100 MASS SET ARE IDENTICAL TO AMH-38 BUT THE MAIN MASSES

ARE LARGER 10 KG DISCS AND A 7TH BINARY MASS TUBE OF 6.4 KG IS INCLUDED.

Figure 51. AMH mass set

6.6 PG7601, REMOVE, CLEAN AND REINSTALL THE PISTON-

CYLINDER MODULE

It may be necessary to remove the piston-cylinder module from the PG7601 Platform to clean the piston-

cylinder or have it recalibrated. For instructions on removing the piston-cylinder module, disassembling,

cleaning and reinstalling it, see Sections

6.6.1 to 6.6.3.4.

6.6.1 REMOVING THE PISTON-CYLINDER MODULE

To remove the piston-cylinder module, remove the AMH automated mass handler and mass

set from the PG7601 Platform (see Section 6.5).