DH Instruments ADCS-601 - Platform and Bell Jar; Piston-Cylinder Module (Pc-7100;7600-10,Tc); Table 5. PG7601 Platform Parts List

ADCS-601™ OPERATION AND MAINTENANCE MANUAL
© 2005 DH Instruments, Inc. Page 32
DESCRIPTION PART #
402224
9 ea. Calibration report:
- PG7601 Platform
- PG7601 10 kPa/kg piston-cylinder module
- PG7601 AMH mass set
- PG7601 reference vacuum CDG
- FPG8601 platform with FPG8601 piston-cylinder
- FPG8601 reference vacuum CDG
- FPG8601 2 kg mass set
- RPM4 A116Ks
- PPC3-100K A116Ks/BG15Ks
550100
1 ea. ADCS-601 Test Report 550141
1 ea. ADCS-601 Support CD 402275
1 ea. DHI General Accessory CD 102987
3.1.3 PG7601 PLATFORM AND BELL JAR
The PG7601 Platform is shipped in a molded transit case. The PG7601 Platform
accessories are also included in the case. The PG7601 bell jar is packed in a separate
double corrugated container.
To unpack proceed as follows:
Open the PG7601 shipping and storage case.
Remove the PG Terminal and accessories from the upper packing insert. Inspect and
inventory the accessories (see Table 5).
Remove the upper packing insert.
Carefully lift the PG7601 Platform from its position in the lower packing insert. Note the
orientation so that the same orientation is used when PG7601 is repacked.
Reinstall the upper packing insert into the shipping and storage case and store in a safe place.
Table 5. PG7601 Platform parts list
DESCRIPTION PART #
1 ea. PG7601 platform including: 402216
1 ea.
Bell jar and seal (in separate double corrugated container)
122106 and
101546
1 ea. PG7000 Terminal 401284
1 ea. Power cord, 7.5 ft 100770
1 ea. Cable, PG Terminal to Platform 102227
1 ea. Molded transit case (in which the Platform is shipped) 122576
Accessory kit including: 402217
2 ea. O-ring, Buna 2-242 101976
1 ea. Tool, 3 mm hex wrench (with T handle) 103473
1 ea. Cable, null modem 402114
1 ea. Allen wrench, 5 mm 102262
1 ea. Spanner wrench (metrological) 122568
1 ea.
Krytox® GPL205/6 .5 oz.
102496
1 ea. Gift kit with gloves 400511
3.1.4 PG7601 PISTON-CYLINDER MODULE (PC-7100/7600-10,TC)
The piston-cylinder module is shipped in a PVC bullet case packed in a corrugated container with
custom foam inserts. The piston-cylinder module accessories are also in the corrugated container.
Open the corrugated container and remove the piston-cylinder module and accessories.