DH Instruments ADCS-601 - Other Device Run Screens; Pg7601 Pressure Standard; Figure 38. PG7601 Run Screen

4. OPERATION
Page 79 © 2005 DH Instruments, Inc.
BUTTON DESCRIPTION
Change Unit of Measure
Change measurement mode (gauge to absolute and vice-versa)
(see Section
4.2.3).
Press the down arrow
to change the measurement mode, press the
button itself to reset the current measurement mode.
Leak Test
Run an ADCS-601 pressure leak test (see Section 4.2.9). The
leak test can be used in absolute measurement mode only.
4.3.6 OTHER DEVICE RUN SCREENS
4.3.6.1 PG7601 PRESSURE STANDARD
The PG7601 Run Screen provides more detailed information on PG7601
status and a Toolbar to control it directly. Use the [PG7601 Run Screen]
button on the ADCS Tools Main Toolbar to open the screen. The screen
may be resized and relocated.
The PG7601 Run Screen should only be used to view PG7601 status. Use of
the Toolbar on this run screen may conflict with other ADCS-601 Tools
functions. The PG7601 Run Screen Toolbar should only be used for advanced
trouble shooting by qualified personnel.
Figure 38. PG7601 Run Screen