MCQ-PRO RFID Reader — Installation and Tuning Manual Version 1.00
Page 45 of 89
a. Maximum time during which this pattern remains active (in milliseconds).
When this time elapses, the multiplexer switches to the next pattern (or the first
pattern if this pattern was the last one). A value of zero disables this limit.
b. Maximum rounds (number of Wake-up commands sent to the tags) during
which this pattern remains active. When this maximum is reached, the
multiplexer switches to the next pattern (or the first pattern if this pattern was
the last one). A value of zero disables this limit.
You can duplicate an existing pattern by clicking on “ Duplicate” button.
You can delete a pattern by clicking on “ Remove” button.
When you are finished defining patterns click on “ Apply” button to apply pattern
configuration.
To Next Page
Loading...