Dialoc ID MCQ-PRO - EAS and State Tab

MCQ-PRO RFID Reader — Installation and Tuning Manual Version 1.00
Page 58 of 89
9.2.2 EAS and State tab
Figure 48: C220 panel (Parameters tab)
Electronic Article Surveillance (EAS)
Click “Enable”/“Disable” to enable/disable EAS state of all C220 tags in the RF field.
Tags must be locked for this operation to function properly. To change EAS state
of unlocked tags, use memory writing operation instead.
Tag State
To change state of tags, place C220 tags in radio field and:
 Click “Quiet” button to request tags to stay quiet;
 Click “Wake Up” to exit tags from quiet state.