MCQ-PRO RFID Reader — Installation and Tuning Manual Version 1.00
Page 47 of 89
Figure 37: Read Configuration panel (General tab)
When reading:
Reset timer when the first tag is detected: requests DIALOC ID MCQ-Pro to reset timer
displayed in Radio Events/Statistics panels when the first tag is detected.
Beep each time a tag is detected: requests DIALOC ID MCQ-Pro to play system bell each
time a tag is detected.
Radio buffer polling period: changes the period used by DIALOC ID MCQ-Pro when
polling events from device’s radio. This is useful to simulate greater network latency.
Stop reading is one of these conditions is reached:
Number of tags expected: indicates that DIALOC ID MCQ-Pro stops reading as soon as
this number is reached.
Read duration: indicates that DIALOC ID MCQ-Pro should automatically stop reading
when this duration in milliseconds from start has elapsed.
To Next Page
Loading...