DIESTRO 103APV4R ELECTROLYTE ANALYZER
17 JS Medicina Electrónica
Fill port position for Capillary Fill port position for Tube or Syringe.
See "RETRACTABLE FILL PORT"
BIOHAZARD. Samples, capillaries and adapters are potentially infectious.
Handle with gloves.
After removing the sample, clean the sampling capillary well with ISE Cleaning
Solution Solution ISE REF IN 0400
The Capillary Adapter is specially made to adapt the sample needle of the analyzer to a
Capillary:
● Place the sample in the capillary position
● Connect the adapter to the end of the capillary that has the sample loaded.
● Hold the end of the fill port and connect the adapter with the capillary and press “Load”.
● Once the sample is loaded, remove the capillary and the adapter and press ready.
Discard the adapter and capillary at the end of each measurement.
To Next Page