Diestro 103APV4R - WAYS TO LOAD THE SAMPLE INTO THE AUTOSAMPLER

DIESTRO 103APV4R ELECTROLYTE ANALYZER
97 JS Medicina Electrónica
We load the first sample into position 1 of the tube disc of the sampler and select serum or
urine according to what we want to measure.
If we are going to make serum and urine measurements we must place all the serums together
and all the urine together, without mixing the order with each other, in order to achieve a better
measurement.
MAN. (Manual)
It allows you to enter an ID manually with the on-screen keyboard or an external
keyboard/scanner.
SKIP
Skip that tube.
CANCEL
Aborts the scan.
MEASURE
The measurement of the scanned tubes begins.
PREV
Position sampler on previous tube.
4. WAYS TO LOAD THE SAMPLE INTO THE AUTOSAMPLER.
The sample can be loaded from a sample tube or cup.
To load from a sample cup, first place an empty primary tube, and then place the sample cup
inside the tube.