The operator can enter the sample manually in case it cannot be detected (a
low conductivity sample) by pressing "Manual Loading". See the
"Undetectable samples" section
4. PRINTING RESULTS
=======================
Measure Report
#64 Measure ID
04/04/2022 10:19:36 Measure Date & Time
JS Medicina Electronica Institution Name
103APV4R S/N: 1 Analyzer Model and Serial Number
UI: 1.0 FW: 1.57 GUI & Firmware Versions
-----------------------
id : 569831555 Patient ID
Name : PABLO PEREZ Patient Name
Sex : Male
Age : Adult
-----------------------
Electrolyte Report
Na : 154.5 mmol/l↑ Sodium Measured Value (Flagged above maximum)
K : 3.64 mmol/l Potasium Measured Value
Cl : 107.2 mmol/l↑ Chlorine Measured Value (Flagged above maximum)
Ca : 0.37 mmol/l↓ Calcium Measured Value (Flagged below minimum)
Li : 0.38 mmol/l Lithium Measured Value
-----------------------
Tmeas : 20.2 °C Actual Temperature of pH measurement
pH@37 : 7.740↑ Corrected pH at 37°C (Flagged above maximum)
Ca@7.40: 0.43 mmol/l↓ Corrected Calcium @ pH=7.40 (Flagged below minimum)
-----------------------
TCO2 : 23.95 mmol/l TCO2
Tmeas : 24.8 °C TCO2 reactor temperature
=======================
Printed measure report
See the "REFERENCE VALUES" section for more details
about normal and critical electrolyte values in serum.
See the section: "ELECTRODES"
To Next Page
Loading...