Diestro 103APV4R - 18 - MAINTENANCE; DAILY MAINTENANCE

DIESTRO 103APV4R ELECTROLYTE ANALYZER
71 JS Medicina Electrónica
Failure of
electronic
components
Technical Service.
C
The balance
during 1-point
calibration
differs from the
last 2-point
calibration.
External
interference
during
measurement.
Bubbles in the
liquid circuit.
Electrode failure.
Failure in the
measurement
channel.
Poor grounding.
Supply voltage
with interference.
The result is
not valid.
● Repeat
measurement or
calibration
● Check for blockages
or leaks in pipes
and electrodes.
● Check valves and
peristaltic pipe.
● Change electrodes.
● Investigate possible
interference from
other equipment or
appliances.
● Contact technical
support.
L
The balance
during 1-point
calibration
differs from the
last 1-point
calibration.
Q
Sharp
differences
during the
measurement
process.
In the
Sharp
differences
during sample
stabilization.
Measures low
sodium
Dirty sodium
electrode
Low sodium
electrolyte
measurement
values
Pass sodium
conditioner
18 – MAINTENANCE
The analyzer was designed to require minimal and easy maintenance:
1. DAILY MAINTENANCE
1.1 Analyzer decontamination
BIOHAZARD. Samples, capillaries and adapters are potentially infectious.
Handle with gloves.
1.1.1 Keep the workbench and analyser surfaces in hygienic conditions.