To Next Page

To Previous Page

13. SETTING SEASONAL ADJUSTMENT (MONTHLY BUDGET)

The Seasonal Adjustment percentage feature can be utilized to alter the

programmed watering run time on a monthly basis.

NOTE: This setting is not available while in Propagation Mode.

To set seasonal adjustment in %:

1. Push to select Set Budget .

You can review all monthly budgeting settings by pushing .

Indicates Month

2. Push the button and the 100% appears flashing.

3. To set the desired seasonal adjustment % (5-200%), Push or

Example, if a 20 minute duration is programmed, and then the monthly budget

is changed from 100% to 50%, the duration will now be 10 minutes for the

selected month.

4. Repeat the steps to set the desired seasonal adjustment % for each month by

pushing and following the previous steps for each month.

5. Push to confirm settings.

Push the button to proceed to the next step Rain Delay .

Questions and Answers:

Need help?

Do you have a question about the DIG 710AP Series and is the answer not in the manual?

DIG 710AP Series Specifications

General