Digi ConnectPort X2e ZB User Manual

Button
20
Button
The button on the ConnectPort X2e ZB is capable of performing a number of Digi-defined actions,
including:
 Reset the device configuration settings to their factory defaults
 Enable configuration changes via the device discovery tools within a five-minute
window
 Enable the device web interface
 Enable a special purpose Wi-Fi configuration mode
Some of these features are enabled on the button by default, but all behaviors can assigned either to
the “default” button, or to “none” (to disable the feature); see below for detailed descriptions of
these features. This assignment is done through the iDigi Manager Pro interface, in
Properties > Advanced Configuration > Button Service Assignment. The choices for each
button service assignment are “Default button,” “per Digi product specification,” which means
to use the default behaviors described on the following page, and “Feature disabled,” which
means that the feature is not assigned to the button.
The button state can also be read by a Python application. This can be done in conjunction with the
Digi standard actions, the button behaviors can be enabled/disabled individually, or all Digi
behaviors can be disabled to provide full responsibility for the button to an application. See "Button
handling" on page 61 for details.
Button

Digi ConnectPort X2e ZB Specifications

General

Brand	Digi
Model	ConnectPort X2e ZB
Category	Network Router
Language	English