Digi ConnectPort X2e ZB User Manual

Additional device configuration settings
31
Additional device configuration settings
There are several additional device features that are not essential for IP network connectivity, but
which will require configuration settings to be entered or changed from their defaults.
Python
Any Python programs loaded onto the ConnectPort X2e ZB can be configured to start
automatically at system startup.
XBee settings
The ConnectPort X2e ZB provides a gateway between an Internet Protocol (IP) network wired or
wireless devices and a network of various wireless devices containing XBee or ZigBee wireless RF
modules. Typically, these wireless devices are small sensors and controllers. Remote nodes in an
XBee network can be other Digi ZB or SE nodes, or 3rd-party nodes.
The XBee module can be configured as a coordinator or router in an XBee or ZigBee network. For
information on configuring the XBee module as a coordinator or router, and for complete XBee
module settings and their descriptions, and discussions of XBee network concepts, see the
XBee/XBee-PRO ZB SMT RF Modules Product Manual (90000976).

Digi ConnectPort X2e ZB Specifications

General

Brand	Digi
Model	ConnectPort X2e ZB
Category	Network Router
Language	English