Configuration from iDigi Manager Pro
45
XBee RF module settings
The configuration information for an XBee node is displayed by opening its Properties page.
To do this, either double-click on the node in the XBee Networks page, or right-click the node
and select Properties or click the Properties toolbar button.
The Basic Settings control basic
operation of the XBee module in an XBee network. Advanced radio settings control behavior of
the XBee module at a more detailed level. The Summary view provides an overview of current
XBee RF module operational and state information.
If you select multiple devices, multiple Properties pages will be open corresponding to each
device that was selected.
To Next Page
Loading...
Need help?
General
