Configuration from the Web interface
32
Configuration from the Web interface
The web interface for ConnectPort X2e ZB is intended to support basic feature configuration as
well as critical network configuration. Not every device setting is displayed in this interface. For
more extensive access to settings, use the iDigi Manager Pro interface.
Open the web interface
To open the web interface, use the Digi Device Discovery utility in Digi ESP for Python to get the
IP address for the device. The Digi Device Discovery utility locates Digi devices on a network. It
uses a Digi International-proprietary protocol, Advanced Digi Discovery Protocol (ADDP), to
discover the Digi devices on a network, and displays the discovered devices in a list. Digi Device
Discovery can be launched from the Digi ESP for Python interface.
Note: If you already know the IP address for the device, you can open a web browser and enter the
IP address in the address bar to open the web interface. For example http://10.101.1.178
To launch Digi Device Discovery within Digi ESP:
1 Launch Digi ESP from the Start menu: Start > Digi > Python > Dev Tools... > Digi ESP for
Python.
2 Open the Device Manager: from the Digi ESP main menu, selecting
Device Options > Device Manager, or on the toolbar, click the Device Manager button.
3 In the Device Manager window, click on the Device Discovery button located on the toolbar
above the list of available remove devices.
To Next Page
Loading...
Need help?
General
