Digi ConnectPort X2e ZB User Manual

Administration from the Web interface
50
File Management
The File Management page loads files onto the ConnectPort X2e ZB and displays current
information about loaded files. For a description of the filesystem layout, see page 67.
 Volume Information: Displays the current directory for loading files and free space
remaining.
Note: Digi recommends using no more than 20 MB for custom applications, as the
ConnectPort X2e ZB requires a portion of the same space to be capable of managing
persistent system logs and firmware updates.
 Upload to Current Directory: Uploads files to the current directory. Use the Browse
button to find a file on your PC to be uploaded to the ConnectPort X2e ZB. Click
Update file to begin the file upload process.
 File List: A listing of the “current directory” (as noted in the Volume Information
area) on the device.
– Open: Opens a directory after it is selected in the file list. The “current directory” will
change and the list will be updated.
– Make Directory: Creates a new, empty directory in the “current directory.”
– Save As: Downloads a regular file from the filesystem to your local PC.
– Remove: Deletes files or, for directories, empty directories only.
 Refresh button: Reloads all the information on the page.
System Log
The System Message Log File Browser is a low-level debugging and diagnostic tool that allows
viewing entries in a system log file. The default log file that can be viewed from this browser is
digi.log. This file is the primary message log for informational notices. This log is persistent and
can have data from multiple boots in it. But because it has a maximum size, it is not guaranteed to
contain all of the device history.
The Message Filters allow Digi Technical Support working with customers on troubleshooting
issues to more quickly hone in on areas of interest in the log file as needed. The names of the filters
correspond to features in the ConnectPort X2e ZB and are Digi-internal.
Reboot
To reboot the ConnectPort X2e ZB, click the Reboot menu option. Wait approximately 1 minute
for the reboot to complete.

Digi ConnectPort X2e ZB Specifications

General

Brand	Digi
Model	ConnectPort X2e ZB
Category	Network Router
Language	English