Digi ConnectPort X2e ZB User Manual

Administration from iDigi Manager Pro
52
Restore Factory Defaults
Administration > Restore Factory Defaults restores the factory default configuration to the
selected device or devices. The only supported choice is to reset all the configuration settings.
Reboot
Administration > Reboot reboots the selected device or devices.
Disconnect
Administration > Disconnect disconnects the device from iDigi. If the device is configured to
automatically reconnect to iDigi, it will re-establish the connection to iDigi after its
reconnection timeout period has expired.
Firmware
The Firmware options perform several types of firmware updates.
Update Firmware: Gateway operating system firmware updates
Firmware > Update Firmware updates the gateway operating system firmware from a specified
firmware file. In the dialog, select a firmware file to upload to the selected device or devices. Once
the firmware file is downloaded to the device, the device will be rebooted automatically.
Update Gateway XBee Radio Firmware
Firmware > Update Gateway XBee Radio Firmware updates the firmware on the XBee RF
module on the ConnectPort X2e ZB. In the dialog, select an XBee radio firmware file to upload to
the selected device or devices. Once the XBee radio firmware file is downloaded to the device, the
device will be rebooted automatically.
Update XBee Node Firmware
Firmware > Update XBee Node Firmware updates the XBee firmware for the selected remote
node.
Once the XBee radio firmware file is downloaded to the remote node, the remote node will
be rebooted automatically.

Digi ConnectPort X2e ZB Specifications

General

Brand	Digi
Model	ConnectPort X2e ZB
Category	Network Router
Language	English