Digi ConnectPort X2e ZB User Manual

Configuration from the Web interface
37
Configuration settings pages
Ethernet Network
The Ethernet Network settings display the current IP address and DHCP settings for Ethernet
network communications. The IP address can be changed, either by obtaining a new one through
DHCP or by entering a static IP address.
The Domain Name Service Configuration show the two Domain Name System servers to be used
as static servers when dynamic mechanisms do not supply enough DNS servers
The iDigi Service Configuration has one setting, Server Address. This setting is the address of
the iDigi server used to manage the ConnectPort X2e ZB. The Configuration > iDigi
Connectivity page enables or disables the connection to the specified iDigi server.
Wireless Network
The Wireless Network settings display the current IP address and DHCP settings for Wi-Fi
network communications. The IP address can be changed, either by obtaining a new one through
DHCP or by entering a static IP address.
Wireless Wizard
The Wireless Wizard link launches a wizard that is used to “teach” a Wi-Fi ConnectPort X2e ZB
device the wireless parameters needed to further configure wireless settings and operation.The
wizard provides a place to copy in the information required for the to connect to your local WiFi
network. In this instance, the ConnectPort X2e ZB is a Wi-Fi “client” connecting to an existing
access point. The information you are required to enter in this wizard should be obtained from the
network administrator for the wireless network the ConnectPort X2e ZB will use. To complete the
wizard:
1 Enter the SSID, or choose an SSID from the list of values, if supplied. This selection is
required.
2 Enter the type of network security used on the wireless network.
3 Depending on the network security type, additional parameters can be entered.
4 Messages are displayed while the parameters are being processed and when the wizard is
complete.
For security reasons, the wireless configuration resulting from running this wizard cannot be
viewed, only modified by re-running the wizard.

Digi ConnectPort X2e ZB Specifications

General

Brand	Digi
Model	ConnectPort X2e ZB
Category	Network Router
Language	English