Hardware interfaces
8
Hardware interfaces
ConnectPort X2e ZB hardware interfaces include a button for controlling various device
operations, LEDs that indicate device state and status of connections, link and activity for Ethernet,
Wi-Fi, and XBee network connections. Some of these hardware features can be controlled through
programming. Hardware interfaces are covered in "Hardware" on page 14.
Configuration and management interfaces
To establish network connectivity with a ConnectPort X2e ZB device, minimal configuration is
required in many environments. This means that you may not need to set or change configuration
settings from their factory defaults to begin developing with the device. As necessary, there are
several user interfaces for interacting with the ConnectPort X2e, for example, to view or change
configuration settings or perform important administrative tasks such as updating firmware or
rebooting the device.
A web-based interface for configuring, monitoring, and administering Digi devices.
iDigi Manager Pro, a remote-management interface.