Configuration from the Web interface
38
Python: configure automatic starting and exit conditions for Python programs
The Python Autostart Configuration page configures the automatic starting of Python programs
that are loaded on the ConnectPort X2e ZB device. See "File management" on page 48 for details
on loading files. These programs are executed through the specified “python” commands.
Select the Enabled checkbox to set the program to be automatically started at system startup.
In the Command field, enter the name of the Python file to be started, and any program arguments.
The On Exit Action setting controls the action to be performed in the event the program exits.
Do Nothing: Continue device operation without doing anything about the program.
Reboot: Reboot the device.
Restart the Script: Restart the Python program.
For example:
To Next Page
Loading...
Need help?
General
