Digi ConnectPort X2e ZB - Page 47

Common administrative tasks
47
XBee RF module firmware updates
Updating the firmware for XBee RF modules involves two firmware update scenarios:
 Update firmware for the XBee module on the gateway
 Update firmware on XBee modules on nodes elsewhere in the network. This type of
update is known as an over-the-air (OTA) firmware update.
Download firmware update files from Digi
There is only one firmware file for the XBee RF module in ConnectPort X2e ZB products. It is
named XBP24-S2C_40XX.ebl, where XX is the firmware version.
This firmware is located on the Digi Support site at:
Support->XBee/XBee-PRO ZB SMT (S2C)Modules->Firmware Updates
From this location, you will download the .zip file; the .ebl file is included in the .zip file.
Then, you can use the Firmware Update function from the web interface or iDigi Manager Pro to
update the firmware.