Digi SM-500MK4 DP - Printing Position

SM500MK4 Service Manual
27
5.2.4 Printing Position
To adjust the printing position when printing is out of alignment. The process only allows adjusting vertical
position only.
KEY TO PRESS OPERATION
-- At R mode.
KEY TO PRESS OPERATION
+ [5][1][4]
-- Go to Thermal Head calibration.
KEY TO PRESS OPERATION
[2][0]
OR
[2][0]
OR
-- Adjust upward.
-- Adjust downward.
-- Store new value and Exit to R mode.
All manuals and user guides at all-guides.com