SM500MK4 Service Manual
29
4. Use the tip of the Cleaning Tool to clean the Thermal Head portion as shown:
CAUTION
Use only the cleaning pen from the provided cleaning kit
Do not clean or try to remove dirt or anything sticking on thermal head with sharp objects – this will
DAMAGE the thermal print head.
5. After Finish cleaning press down the Printer Head Handle first, then close the Printer Front Door and
Printer Side Door.
6. Turn ON the scale, and depress [FEED] key to feed the label.
5.3.2 Basic Maintenance
Clean scale surfaces and platter periodically with a soft damp cloth. Do not use alcohol or detergent.
Cleaning Tool
Thermal Head
To Next Page
Loading...
Need help?
General
