SM500MK4 Service Manual
88
SPEC 661: SELECTION OF ADDITIONAL PRICE ROUNDING METHOD FOR TOTAL
0: NO ADDITIONAL ROUNDING
1: 1 / 4 ROUNDING
2: SPECIAL ROUNDING
3: ROUNDING FOR 1 ST DIGIT
4: CUT OFF
5: CUT UP
6: Υ5 CUT OFF AND Υ10 CUT OFF
7: DENMARK ROUNDING
SPEC 662: SELECTION OF UNIT PRICE RE-CALCULATION
0: NO UNIT RE-CALCULATION
1: UNIT RE-CALCULATION
SPEC 663: SELECTION OF NORDIC COUNTRY
0: INHIBIT
1: ALLOW
SPEC 664: SELECTION OF DENMARK SELF SERVICE TYPE
0: INHIBIT
1: ALLOW
SPEC 665: SWAP OF UNIT PRICE AND PRICE DISPLAY IN REGISTRATION MODE
0: NO SWAP
1: SWAP
SPEC 666: MULTIPLICATION OPERATION IN PREPACKS MODE
0: INHIBIT
1: ALLOW
SPEC 667: SM-90 DOT MATRIX DISPLAY SCANNING RATE
0: NORMAL
1: SLOW
2: HIGH SPEED
3: VERY HIGH SPEED
SPEC 668: DISPLAY INTERVAL
0: FAST/DISABLE
1: NORMAL
SPEC 668: 16x16 COM NAME
0: 1.0 SEC DISPLAY
1: 1.5 SEC DISPLAY
2: 2.0 SEC DISPLAY
3: 0.5 SEC DISPLAY
SPEC 669: MASK WEIGHT DISPLAY
0: NO
1: YES
SPEC 670: SCROLL MESSAGE DISPLAY
0: FULL LENGTH
1: HALF LENGTH
SPEC 671: DISPLAY CPU SELECTION
0: DISPLAY CPU BELOW VER 0.16
1: DISPLAY CPU VER 0.16 AND ABOVE
SPEC 672: KEYBOARD SELECTION
0: NORMAL KEYBOARD
1: 100 PRESET KEYS KEYBOARD
2: 80 PRESET KEYS KEYBOARD
SPEC 673: HANGING SCALE
0: NO
1: YES
To Next Page
Loading...
