UTM-00339 | Rev 19
Page 74 of 253
DetNet South Africa Copyright © 2021
This function enables the user to demonstrate the CE4 Tagger in action by replicating the screen on a PC. It may
be used by trainers, product presenters and document writers.
1. Main Menu
• Press SoftKey to select Configuration Settings.
2. Configuration Settings Menu
• Press to select Advanced Setup.
3. Advanced Setup Menu
• Press to select Remote View.
4. Screen Capture
• Press to Enable on USB when
prompted
• CE4 Tagger actions will be
replicated on the PC screen
• Press to disable remote view.
Additional PC software may be required from the manufacturer to support this feature.
USB cable or Wi-Fi must be connected, and the PC software must be configured and
activated before the Remote View function can be used.
To Next Page
Loading...