UTM-00339 | Rev 19
Page 93 of 253
DetNet South Africa Copyright © 2021
Once the desired Plan has been selected, the user can download ViewShot design to Tagger
1. From Main Menu
• Press SoftKey to select Configuration Settings.
2. Configuration Settings Menu
• Press to select Advanced Setup.
3. Advanced Setup Menu
• Press to select Connections.
4. Connections
• Press on the keypad to connect CE4 Tagger to PC via USB.
5. USB Link with PC
• Ready for PC – Connect USB cable between PC and CE4 Tagger
• Connected to PC
To Next Page
Loading...