Step 2 Setup Wireless:
Below given āWirelessā screen will appear.
Here is the description of every setup item:
radio
The wireless radio of this Router can be enabled or disabled
to allow wireless stations access.
This is the name of wireless network. Input the SSID name
that your wireless ISP has provided you with.
This is the radio frequency used to transmit and receive the
wireless signal. The wireless devices in the same network
should follow the same setting. Select the channel here.
Select the desired mode. The default setting is 2.4GHz
(B+G+N).
Select any channel width from the pull-down list. The
default setting is Auto 20/40M, which can adjust the channel
To Next Page
Loading...
