EasyManua.ls Logo

DIGISYNTHETIC K3 - Output Volume Setting; Music to Center Volume Settings; Main Output PEQ Settings

Default Icon
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
MIC DIR TO MAIN 5.0dB
EFF TO MAIN
MUS TO MAIN: 0.0dB
8.2 Direct sound to the main output, and the effect to the main output volume setting
Range: Mute,-30db ~ 0db, Stepping: 0.5db
Operation: Press the buttons "Main output Mode" on the panel continuously into the Direct sound to main output and
Effect to the main output volume, as shown below:
Keys "<" and ">" to switch the needed parameters.
Turning knob "music volume / edit (press) "to set
Operating method 2: Operation from the interface software to set up
8.3 Music to the main output volume settings
Range: Mute,-30db ~ 0db, Stepping: 0.5db
Operation: Press the buttons "Main output Mode" on the panel continuously into the Music to main output volume,
as shown below:
Turning knob " usic volume / edit (press) "to set
Operating method 2: Operation from the interface software to set up
8.4 main output PEQ settings
The PEQ qty: 5
Type: parametric equalization filter (can be set to low / treble tone filter) and graphic equalizer
Frequency range: 20hz ~ 20khz
Gain Range:-15db ~ +12 db, step 0.1db
Bandwidth range: 0.011 to 3.595
Methods of operation: (panel can only set the equalizer gain)Press the buttons "Main output Mode" on the panel
continuously into the MAIN PEQ, as shown below:
As shown below:
MAIN PEQ 101Hz1
0.0
+ 6
- 6
Panel
Panel
Panel
Panel
0.0dB
Display
Display
Display

Table of Contents

Related product manuals