DIGISYNTHETIC K3 - Technical Specifications

26
25、Technical Specification
Music parts
SNR >102dB(BYPASS , Pitch shift closed)
THD 0.01% 20Hz-20kHz
Frequency response 20Hz-20kHz ± 0.5dB
Input sensitivity/ impedance 0.707V/47kohm
Max-output 14Vpp/60ohm EQ output
Parametric EQ :5 bands
Type PEQ High-shelf Low-shelf、 、
Gain +12dB~-15dB Stepping， ± 0.1dB
Frequency: 20Hz~20kHz
Bandwidth: 0.011-3.595
Pitch Shift ± 7 Levels, Stepping 100 cents
Stereo audio input Level-adjustment - ~+0dB∞
Video：
3-way video input, 1-way video output
Input Sensitivity/Impedance 1Vpp/75ohm
Output Sensitivity/Impedance 1Vpp/75ohm
Sub woofer parts
THD 0.01% 20Hz-2000Hz
Frequency Response 20Hz-2000Hz ± 0.5dB
3-bands PEQ
Type PEQ High-shelf Low-shelf、 、
Gain +12dB~-15dB Stepping 0.1dB， ±
Frequency 20Hz~2000Hz
Bandwidth 0.011-3.595
MIC parts
SNR >100dB(Effect closed)
THD
0.01%
50Hz-16kHz(Effect closed)
Frequency
Response
50Hz-16kHz ± 0.5dB
42mv/4.7kohmInput sensitivity/ impedance
Max-output 13.8Vpp
7-bands PEQ
Type PEQ High-shelf Low-shelf、 、
Gain +12dB~-15dB step 0.1dB， ±
Frequency 20Hz~20kHz
Bandwidth 0.011-3.595
5-way MIC input
Remote 1-way line control 5-pin， socket
RS232 9-pin socket
USB
Power Voltage AC 90-250V/50Hz
Fuse T1AL/250VAC
Power-consumption 10W
Weight 2.2KG
Size 45 482 123(mm)× ×