DigiTech iPB-10 - Amp Loop & Stomp Loop Setup

24
Amp Loop & Stomp Loop
Connection DiagramsConnection Diagrams
Connect your guitar to
the iPB-10 Input.
Set the Amp/Mixer
switch to ‘AMP’.
Connect the stompbox Output to
the iPB-10 Stomp Loop Return.
Connect the iPB-10 Stomp Loop
Send to the stompbox Input.
Connect the iPB-10 Le
(Mono) Line Out to the
amp Loop Return.
Connect the iPB-10
Amp Loop Send to
the amp Input.
Connect the amp Loop
Send to the iPB-10 Amp
Loop Return.