DigiTech iPB-10 - Working with Amps: Changing the Amp

34
Changing the Amp
1. If the Pedalboard window is not already acve, select
it by touching the Pedalboard icon.
2. From either Performance mode or Edit mode, touch
the amplier.
3. A window will appear displaying all available internal
amps. Select the desired amplier from the list. The
matching cabinet will be loaded with the amp.
4. Touch the Done buon.
5. If you want to change the locaon of the amplier in
the signal chain, touch the Edit buon to display the
Edit screen.
6. Touch the Amp icon and drag it to the desired locaon
within the signal chain.
7. Once complete, touch the Performance buon to get
back to Performance mode.
1.
2.
3.
4.
Working With AmpsWorking With Amps
6.
5. & 7.