DigiTech iPB-10

37
Assigning Pedals to the A-E Footswitches
1. If the Pedalboard window is not already acve, select
it by touching the Pedalboard icon.
2. Touch the Edit buon to display the Edit screen.
3. Touch the eect pedal you would like to assign to the
footswitch and drag it into the desired footswitch slot.
You will noce that the pedal is now visible in the
assigned slot and an icon has appeared over the pedal
indicang which footswitch the pedal is assigned to.
4. Once all pedal assignments have been made, touch
the Performance buon to get back to Performance
mode.
5. From Performance mode you can easily see which
pedals are assigned to each of the A-E footswitches
(see adjacent picture). Pressing any footswitch
will turn it’s assigned pedal on and o and the A-E
footswitch LEDs will provide status for each pedal.
Assigning FootswitchesAssigning Footswitches
NOTE: To remove a footswitch assignment, simply drag the pedal up out of the assigned slot.
5.
1.
2. & 4.
3.