DECLARATIONOFCONFORMITY
Manufacturer’s Name: DigiTech
Manufacturer’s Address: 8760 S. Sandy Parkway
Sandy, Utah 84070, USA
declares that the product:
Product name: iPB - 10
Product opon: all (requires Class II power adapter that conforms to the
requirements of EN60065, EN60742, or equivalent.)
conforms to the following Product Specicaons:
Safety: IEC 60065 -01+Amd 1
EMC: EN 55022:2006
EN 55024:1998
FCC Part 15
Supplementary Informaon:
The product herewith complies with the requirements of the:
Low Voltage Direcve 2006/95/EC
EMC Direcve 2004/108/EC.
RoHS Direcve 2002/95/EC
WEEE Direcve 2002/96/EC
EC Regulaon 278/2009
With regard to Direcve 2005/32/EC and EC Regulaon 1275/2008 of 17 December
2008, this product is designed, produced, and classied as Professional Audio
Equipment and thus is exempt from this Direcve.
Roger Johnsen
Director, Engineering
Signal Processing
8760 S. Sandy Parkway
Sandy, Utah 84070, USA
Date: June 30, 2011
European Contact: Your local DigiTech Sales and Service Oce or
Harman Signal Processing
8760 South Sandy Parkway
Sandy, Utah
84070 USA
Ph: (801) 566-8800
Fax: (801) 568-7583
ELECTROMAGNETICCOMPATIBILITY
This device complies with part 15 of the FCC Rules and the
Product Specicaons noted on the DeclaraonofConformity.
Operaon is subject to the following two condions:
• this device may not cause harmful
interference, and
• this device must accept any interference
received, including interference that may
cause undesired operaon.
Operaon of this unit within signicant
electromagnec elds should be avoided.
• use only shielded interconnecng cables.
If you want to dispose this product, do not mix it with general household waste. There is a
separate collection system for used electronic products in accordance with legislation that
requires proper treatment, recovery and recycling.
Private household in the 25 member states of the EU, in Switzerland and Norway may return their used
electronic products free of charge to designated collection facilities or to a retailer (if you purchase a similar
new one).
For Countries not mentioned above, please contact your local authorities for a correct method of disposal.
By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery and
recycling and thus prevent potential negative effects on the environment and human health.