DigiTech iPB-10 - Working with Pedals: Adding Pedals

30
Adding Pedals
1. If the Pedalboard window is not already acve, select
it by touching the Pedalboard icon.
2. Touch the Edit buon to display the Edit screen.
3. Touch the
icon in the empty pedal slot.
4. A window will appear, displaying all available eect
types (i.e. Delay, Mod, Chorus, etc.). Select the desired
eect type then select the desired pedal from the list.
5. Once the desired selecon has been made, touch the
Done buon.
6. Repeat steps 3-5 to add addional pedals to the pedal
board.
1.
2.
4.
5.
3.
Working With PedalsWorking With Pedals