39
© 2009 Directed Electronics. All rights reserved.
Multi-level security arming
Multi-Level Security Arming is a feature that allows the user to select which of the
system's inputs or sensors will be active and which will be bypassed when the
system is armed. (See Table of Zones section of this guide.) Multi-Level Security
Arming can only be accessed from a standard configuration transmitter.
Pressing the arm button again within five seconds of arming the system activates
the Multi-Level Security feature. Each time the arm button is pressed again after
arming, a different security level is selected. The different levels of security are
selected as follows:
Press
one time: The siren chirps once. The system is armed.
Press
a second time within five seconds: The siren chirps twice followed by
a long chirp. Zone Two is now bypassed.
Press
a third time within five seconds: The siren chirps three times followed
by a long chirp. Zone Four is now bypassed.
Press
a fourth time within five seconds: The siren chirps four times followed
by a long chirp. Zones Two and Four are now bypassed.
Press
a fifth time within five seconds: The siren chirps five times followed by
a long chirp. All input zones, except the ignition, are now bypassed.
To Next Page
Loading...
Need help?
General
