EasyManuals Logo

Directed Electronics Python 533 User Manual

Directed Electronics Python 533
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #53 background imageLoading...
Page #53 background image
53
© 2009 Directed Electronics. All rights reserved.
3-11 RUN TIME (TIMER MODE)12, 3, 6, 9 MINUTES: Selects the time in
minutes that the system will operate the engine until the system "times out". This is
the maximum operation period and the system may be shut down using a shut-
down at any time. Using the Bitwriter®, the run time can be programmed for any
duration from 1-16 minutes.
3-12 TIMER MODETIMED STARTS/TEMPERATURE STARTS: The system will
start every 3-hours (a maximum of 6 times) until canceled by the brake, hood,
turning on the ignition, or neutral safety shut-down wires. The temperature start
mode will not start the vehicle unless the interior temperature of the vehicle is less
than 0 degrees F. The temperature start mode will exit after 18 hours.
3-13 SHORT RUN/TURBO 1/3/5/10 MINUTES: When the and

buttons on the transmitter are pressed simultaneously, the vehicle will start for the
programmed short run time. The factory default is 1 minute.
Additional features
For information on Nuisance Prevention Circuitry (NPC), Valet Mode, Rear
Defogger control, Timer Mode and Owner Recognition, refer to the Owner's
Guide at www.pythoncarsecurity.com.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Directed Electronics Python 533 and is the answer not in the manual?

Directed Electronics Python 533 Specifications

General IconGeneral
BrandDirected Electronics
ModelPython 533
CategoryCar Alarm
LanguageEnglish

Related product manuals