Directed Electronics Python 533

44
© 2009 Directed Electronics. All rights reserved.
➤ Menu 3 - Remote start
Menu
Item
One-chirp setting
Two-chirp setting
1
Engine checking: Virtual Tach
Voltage(2), OFF(3), Tachometer(4)
2
Remote start runtime: 12 mins
24 min, 60 min*
3
Parking light output: Constant
Flashing
4
Cranking time: 0.6 sec
0.8, 1.0, 1.2, 1.4, 1.6, 1.8, 2.0, 4.0
second
5
Activation pulse 1
2
6
2nd Ignition/Acc output: Ignition
Accessory
7
Acc state during wait-to-start Off
On
8
2nd status output: Normal
Rear defogger: latch 10 min.
rear defogger pulse
9
Anti grind: On
Off
10
Diesel timer: Wait-to-Start input
Timed 15 , 30 ,45 seconds*
11
Timer mode run time: 12 min
3, 6, 9, min*
12
Timer mode: Timed starts
Temp starts
13
Short run (turbo): 1 min
3,5, 10 min
*Additional settings using the Bitwriter®