RT45 Operator’s Manual Saw - 103
Operate
Operate
1. Lower stabilizer until distance from bottom of skid shoe to bottom of saw bits equals desired trench
depth.
2. Ensure that saw is aligned with planned trench and that tires are pointing straight ahead.
3. Adjust throttle to low.
Breathing crystalline silica dust may cause lung disease.
Cutting, drilling, or working materials such as concrete, sand, or rock
containing quartz may result in exposure to silica dust. Use dust control
methods or appropriate breathing protection when exposed to silica dust.
To help avoid injury:
• Use water spray or other means to control dust.
• Refer to U.S. Department of Labor Occupational Safety and Health Administration guidelines to
learn more about appropriate breathing protection and permissible exposure limits.
Electric shock will cause death or serious injury. Stay
away.
274-049
To help avoid injury: Expose lines by hand before digging. Cutting high
voltage cable can cause electrocution.
Read operator’s manual. Follow safety rules and know
how to use all controls. Your safety is at stake.
273-475
Flying objects thrown by machine may strike people.
Wear hard hat and safety glasses.
To Next Page
Loading...
Need help?
General
