Divesoft Freedom - Universal Codes; Working with Menus; Main Screen Codes; OC Mode

11
Universal codes
BOTH KEYS LONG return to the basic screen under the schematic, leaving all menus
DEBUG SEQUENCE creation of an internal state of FREEDOM dump for later analysis of defects
Working with menus
KEY 1 select marked items
KEY 2 cyclically move the cursor down one item
BOTH KEYS return one level back or access the menu
Main screen codes
KEY 1 switch to next screen (cyclic)
KEY 2 screen on/off (energy saving)
BOTH KEYS access the standard menu
OC mode
KEY 1 switch to next screen (cyclic)
KEY 2 screen on/off (energy saving)
BOTH KEYS entry to OC menu
KEY 1 LONG gas switch up (cyclic)
KEY 2 LONG gas switch down (cyclic)
Free mode and Gauge
KEY 1 switch to next screen (cyclic)
KEY 2 stopwatch start, stop
BOTH KEYS access the menu
KEY 2 LONG stopwatch reset
Log book – Other Dives
KEY 1 Select dive
KEY 2 Scroll down
KEY 1 LONG Page Up (to later dives)
KEY 2 LONG Page Down (to earlier dives)
See the symbols on the sides of the menu. The symbol in the upper part shows the current KEY 1
function. The symbol at the bottom shows the current KEY 2 function. The symbol in the middle
shows the current BOTH KEYS function.
Confirm
Back
Down