33
Ceiling depth reached
Deco stop reached
Under ceiling depth. Decompression required
Decompression stop exceeded. Go down to decompression stop
Deep stop reached
Safety stop. Stay between 6 and 3 meters for 3minutes.
No-decompression dives
Before the dive, activate your FREEDOM, go to Main menu and select Open circuit or make sure that
you have set Open circuit as your Default mode for correct automatic activation. Make sure that the
altitude setting corresponds to your current position. Check your breathing gas and compare it
with the setup. Check the battery status to be sure that it is sufficient for the planned dive.
At the start of the dive, depth, time, no-decompression time in minutes for the current depth,
information in the bottom boxes and graphic information in the right-side column are displayed. The
decompression-status graphic symbol shows arrow up. This is the symbol for free ascent to the
surface without decompression stops.
To Next Page
Loading...